Dialogic 1000Series, Руководство пользователя

Страница: 233 / 326

Routing Table
Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
233
Input:
Inbound Route
o
Inbound TDM
•
Inbound VoIP
Request Type Call
Host
172.13.4.3
IP Port
Calling Number
100
Calling Name William
Called Number
210
Called Name Jane
Redirect Number
165
Redirect Name Mike
Output:
Test Results
Results Test Passed
Reason
Inbound Rule
All VoIP Requests
Outbound Group Any TDM Channel
Outbound Route
VoIP
Device
Bridged Method
1 (see Note) Port
1 (see Note) Channel
100
Calling Number
William Calling Name
210
Called Number
Jane Called Name
165 Redirect Number
Mike Redirect Name
Note: Since the TDM Trunk Group, Any TDM Channel , is ascending – cyclic each time
you click on Simulate Route the port & channel is updated to the next one (with wrapping).
Also, the simulation remembers where it was so if you come back to the simulation the port &
channel pick up where they were. Therefore, you may not see
port = 1 and channel = 1 , but
make sure each time you click Simulate Route the port & channel update.
•
Click on Simulate Route a few times – the port & channel should cycle through all
possibilities.
•
Try a few different values for Request Type and Host .
•
Validation Finished.