Dialogic 1000Series, Руководство пользователя

Страница: 215 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 215
Routing Table
5.2.3 Inbound VoIP Rules Table
The Inbound VoIP Rules is the main table used to route calls originating from the VoIP interface.
When a call is received, the incoming call characteristics are compared against the values entered
in the first row of the table. If a match is found, an action is taken. If no match is found, the next
row in the table is checked. Rows will be tested until a match is found, or there are no more entries
in the table.
The VoIP address, Calling Number, Calling Name, Called Number, Called Name, Redirect
Number, and Redirect Name
all need to match the incoming call for the test to pass. Once a match
occurs, the CPID will be modified based on the CPID manipulation rule selected in the table. Next,
the call will be routed according to the matched rules associated Outbound Routes fields.
If no rows in the table successfully match the incoming call, the call is not routed.
5.2.3.1 Inbound VoIP Rules
Use this table to define the routing rules for all telephony requests that are inbound from the VoIP
network. Rules are evaluated from the top down until a matching rule is found.
Figure 31 is a screen shot of the Inbound VoIP Rules configuration Web page:
Figure 31. Inbound VoIP Rules Configuration Web Page
Select to configure the routing rules for requests that are inbound from the VoIP network.
Select - Click anywhere in this column to select an entry. When a rule is highlighted, the associated
configuration is shown in the tables below. The selected row may be moved up or down in the table
by dragging and dropping it into a different position in the list, or deleted. The selected row may
also be moved by clicking on the Move Selected Row buttons: Up, Down, or To Position.
Note: It is a common error to modify the configuration of the incorrect rule. Make sure that the correct
rule is selected before modifying the configuration.
Enable - Check this box to enable the rule. If this box is not checked, this rule is not checked for
incoming calls.