VISION SENSOR CS 50 –
QUICK START INSTRUCTIONS
2
THE FIRST STEPS
TO SCREEN 1
¡
Unpack the CS 50, mount it mechanically and install
its electrical wiring (4.75-30V DC). Here, two connection
cables are required at a minimum VKHM-Z-5/12-A
(Power I/O and electrical connection, see page 2) and
VKHM-Z-5/RJ-45 (Ethernet cable M12-RJ45 for set-up).
¡
Download and install the most recent software
for the CS 50:
https://www.di-soric.com/de/
Vision-sensor-CS-50-di-soric-59773.html
You will fi nd all the necessary ports in the list on page 3.
To ensure that AutoVision is installed properly, full
administrative rights are required. If applicable, confi gure
network settings on the computer.
¡
Each CS 50 is delivered with a static IP address.
IP 192.168.0.10 / Sub 255.255.0.0
¡
To ensure a stable connection, static IP addresses should
be used in thenetwork. If multiple CS 50 sensors are being
used, the IP addresses must be confi gured to prevent
a network confl ict.
¡
After AutoVision has been started, the the image on the
left image appears and the option to select a device or the
emulator becomes available in the drop-down menu in the
upper left.
¡
Once the desired CS 50 has been selected, the red “Login”
window appears once per device.
¡
When the device is fi rst delivered, there is no user name
or password, please confi rm by clicking “Login” without
entering anything.
¡
Then, you can continue by clicking “Create a New Job”
At this point, you will see the fi rst screen of the “Image” menu
item and be able to begin image set-up