Di-LOG DL9206, Руководство по эксплуатации

Страница: 18 / 28

AC Current Measurements
Warning:
TO AVOID ELECTRIC SHOCK, DO NOT MEASURE
AC CURRENT ON ANY CIRCUIT WHOSE VOLTAGE
EXCEEDS 250V AC.
Caution:
DO NOT MAKE CURRENT MEASUREMENTS ON THE 10A
SCALE FOR LONGER THAN 30 SECONDS. EXCEEDING 30
SECONDS MAY CAUSE DAMAGE TO THE METER AND/OR
THE TEST LEADS.
1. Insert the black test lead banana plug into the
negative (COM) terminal.
2. For AC current measurements , set the function
switch to the AC 10A position and insert the red test
lead banana plug into the 10A terminal.
3. Remove power from the circuit under test, then
open up the circuit at the point where you wish to
measure current.
4. Connect the black test probe tip to the negative side
of the circuit. And connect the red test probe tip to
the positive side of the circuit.
5. Apply power to the circuit.
6. Read the current in the display. The display will
indicate the proper decimal point, value and symbol.