DHOLLANDIA
27
The liftgate can only be used as a
loading platform if the dock is lower
than the vehicle floor.
The liftgate can be used as a bridge
plate, if it is equipped with the optional
tilt cylinders with adjustable platform
orientation.
It is forbidden to drive forklifts or heavy
electric pallet jacks over the platform.
The total weight of the load and the
lifting device must not exceed the
maximum rated capacity of the liftgate.
Beware not to overload!
OVERLOAD
When the intention is to use the platform as a loading platform or bridge plate, following instructions apply:
While loading or unloading, the loading
floor of the vehicle might lower or rise
relative to the loading dock. Use the
electrical controls to adjust the platform
position flush with the loading dock
surface.
Min. 10”
A minimum section of 10” of the
outboard platform edge must cover the
loading dock.
NEVER use a foldable platform as a
bridge plate between the vehicle floor
and a loading dock. Keep the platform
securely stowed in its travel position to
avoid damage
NEVER use a dock plate on top of a
floating platform as a bridge between
the loading dock and vehicle floor.
