Dhollandia DH-L 3300 lbs, Руководство по установке, Страница: 37 / 82

36
DHOLLANDIA
9 MOUNTING OF THE PLATFORM
•
Connect the battery and ground cables of the liftgate to the batteries [see 11 from page 45 onwards], to enable easy manipulation
of the hydraulic cylinders.
•
Grease the bearings of the lift arms [# 1 – 3 below] and the adjustable extension of the tilt cylinders [# 2] before mounting the
corresponding articulation pins.
CAUTION
•
The hydraulic cylinders and circuits might contain air. The piston rods might slide out with shocks when cylinder is filled with oil.
•
ALWAYS observe the safety instructions and precautions contained in the GENERAL SAFETY INSTRUCTIONS FOR
INSTALLATION, MAINTENANCE AND REPAIR manual.
•
In case of doubt, contact the national DHOLLANDIA distributor for further assistance.
WARNING
•
The platform and the lift frame are very heavy! When falling on a person, they can cause serious personal injury or death.
•
Therefore, handle the platform and the lift frame with great care. Use adequate lifting aids such as hoists, an overhead gantry
crane, a fork lift with slings, etc. to secure the heavy components and prevent them from falling.
•
ALWAYS secure the platform against falling, as long as you work within reach of the platform.
•
From the moment the platform is no longer secured , ALWAYS remain vigilant as long as the air in the hydraulic system has not
been bled. Stay out of reach of the platform, and keep clear of the moving parts of the liftgate.