DGSHAPE DWX-4, Руководство пользователя

Страница: 39 / 53

39
Chapter 4
Read This Chapter
Whenever You Face
a Problem. (FAQ)
What to Do If… ...................................................................... 40
Initialization Is Not Performed or Initialization Fails .......................40
The Operation Button Does Not Respond .....................................40
VPanel Does Not Recognize the Machine.....................................40
Cutting Data Can Not Be Output to the Machine, or the Machine Does
Not Operate Although Cutting Data Is Output to It.........................41
The Computer Shut Down When Plural Machines Were Connected .......41
The Ionizer Is Not Effective (Cutting Waste Adhere to the Around Wall
of Cutting Area) ..............................................................................41
Compressed Air Does Not Come Out ............................................42
Abnormal Noise Occurs .................................................................42
Automatic Correction Fails .............................................................42
Tool Management Information Was Lost .......................................43
The Cutting Results Are Not Attractive ..........................................43
There Is a Line of Level Difference in the Cutting Result .............43
Chipping Occurs (Edges of Cut Workpieces Become Chipped) ....... 43
A Hole Opens in Cutting Result .....................................................44
The Dimensions of Cutting Results Do Not Match ........................44
To Install Driver Separately ............................................................44
To Install Software and Electronic Manual Separately...................46
Installation Is Impossible ................................................................47
Uninstalling the Driver ....................................................................48
Uninstalling the VPanel..................................................................50
Responding to an Error Message........................................... 51