What to Do If…
46
Chapter 4 Read This Chapter Whenever You Face a Problem. (FAQ)
Follow the on-screen instructions and continue with the installation.
When installation finishes, click
of the setup menu.
Remove the CD-ROM from the CD-ROM drive.
Switch on the power to the machine.
Connect the machine and the computer with a USB cable.
If you connect more than one unit of this machine to a single computer, refer to "Setup Guide" ("Connecting
Multiple Units").
Use the supplied USB cable.
Be sure to refrain from using a USB hub. If a USB hub is used, there is a possibility that the machine cannot be
connected.
Secure the USB cable with a cable clamp.
The driver will be installed automatically.
To Install Software and Electronic Manual Separately
Procedure
Log on to Windows as “Administrators.”
Insert the DGSHAPE Software Package CD into the computer.
When the automatic playback window appears, click [Run menu.exe]. The [User Account Control] appears, click [Al-
low], and install the softwares. The setup menu appears automatically.
Click [Custom Install].
The driver, software, and the electronic manual can be installed together on this machine. For the method of
installing them at a time, see "Setup Guide" ( "Installing and Setting Up the Software.")
Cable clamp
Содержание DWX-4
Страница 53: ...R6 171006 FA01214...
