26
REVIEWING B
-
SCAN AND UBM VIDEOS
ADJUSTING SCAN IMAGES
The Gain, Intensity, Contrast and Zoom controls (available on the right
-
hand side of the screen)
can be used to enhance the quality of the image. These settings can be adjusted before, during
or after a procedure.
ADDING ANNOTATIONS
Once complete, the exam can be annotated with comments and measurements using the
provided tools. To enable measurement tools and show measurement notations, click on the
[MEASUREMENT TOOLS CHECKBOX].
To disable measurement tools and hide notations, clear
the [
MEASUREMENT TOOLS CHECKBOX]
.
Distance Measurement:
To perform a distance measurement, left
-
click on the
[CALIPER TOOL]
then hold the left
mouse button and drag
across the distance to be measured. A line will appear
indicating the measured distance and a measurement value will
appear on at the end of the line. Multiple measurements may be
performed, however the [
CALIPER TOOL]
must be selected before
each measurement. Measurements can be deleted by right
-
clicking
on a measurement line and selecting
“
Delete
”
from the drop down
menu.
Angle Measurement:
Click the
[ANGLE TOOL]
, Use single clicks of the right mouse
button to designate three points to create the desired angle.
Area Calculation:
Click the
[AREA TOOL]
. Use single
-
clicks of the left mouse
button to designate points around the desired area. Once all
points have been designated, single
-
click the right mouse to
perform the calculation.
Ruler Overlay:
A ruler overlay will be displayed when the
[RULER]
button is
clicked. It will be hidden when the button is clicked again.
The ruler overlay can also be controlled via voice commands.
DELETING NOTATIONS
Distance, angle and area notations can be removed by right
-
clicking on the lines and selecting
“
Delete
”
from the menu displayed or by left
-
clicking on the line to select it and pressing the
“
Delete
”
keyboard key
CREATING B
-
SCAN/UBM REPORTS
Click the
[REPORT]
button in the upper right
-
hand corner of the screen. Select the check box of
the desired images. Images are inserted into the report in the order selected. The report can be
saved to the database as a PDF or printed.
Reports that had been saved to the database will be displayed in the window with patient scans.
PDF versions of reports can be exported by left
-
clicking and dragging the thumbnail image to the
desired location. Refer to the
Exporting and Importing Data
section for more information.
