25
†
This command may be executed through voice control. Refer to the
B
-
Scan and UBM Voice Controls
section.
9.
IF the software is configured as Scan and Record (
Preferences > B
-
Scan Page
), the software
will begin recording as soon as the scan is started.
IF the software is configured as Scan Only (
Preferences > B
-
Scan Page
), the software will
begin scanning, but will not start or stop recording until prompted.
To Start / Stop recording:
-
Click the
[RECORD]
button; or
-
Press the
Enter Key
(keyboard); or
-
Press the
Right Foot Pedal
(Double Pedal accessory)
NOTE:
Once the software has recorded the number
“
Video Buffer Frames
”
specified in the
Operator Preferences, the scan will begin to overwrite itself.
10.
To Stop scanning
†:
-
Click the
[STOP SCAN]
button; or
-
Press the
Space Bar
(keyboard); or
-
Press the
Foot Pedal
(Single Pedal accessory); or
-
Press the
Left Foot Pedal
(Double Pedal accessory).
11.
Review frames recorded during the exam by pressing
←
and
→
on the keyboard or by
moving the slider (below video display). The exam video can also be replayed.
12.
To save images
†,
click the
[SAVE IMAGE]
button (upper right
-
hand corner) or select
File >
Save > B
-
Scan Image.
To save videos
†,
click the
[SAVE VIDEO]
button (upper right
-
hand corner) or select
File >
Save > B
-
Scan Video
†
.
NOTE
: The UBM transducer should be allowed to completely air dry before storage.
