DFRobot OverLord 3D, Руководство пользователя

Страница: 27 / 51

OverLord 3D Printer User Manual
27
(1) Before printing, make sure
there is nothing left on the
buildplate. If there is broken
dry glue membrane left, please
wipe it away with a wet cloth.
Then before printing, paint
glue stick 3 times on the dry
buildplate;
Because the glue is sticky, if
start printing before dry out,
it will be difficult to remove
the print object. To save your
time, you could choose
“Temperature—Heat up Build
plate—60
℃
” to accelerate
the drying process.
OverLord has an acrylic build
plate,
which cannot be
heated. Before printing, you
should tape
the special
printing tape on the board.
The coarse surface of the tape
will help the object stick on
the plate.
(2) Drag .stl model into Cura
and generate printable .gcode
file. Copy that .gcode file into
SD card. Insert SD card into
the bottom of OverLord. The
indicating blue LED will on
once the SD card is inserted.