48
ST102-CS
www.dfi.com
Chipset
This section configures relevant chipset functions.
Primary Display
Select a Graphics device to be the primary display — Auto, IGFX, PEG, PCI.
Internal Graphics
Keep IGFX enabled based on the setup options.
PEG Port Configuration
Configure the internal PCIE1 (PCIe x4) channel.
Enable Root Port
Enable or disable the root port.
Max Link Speed
Configure Max Link Speed: Auto, Gen1, Gen2 or Gen3.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Graphics Configuration
PEG Port Configuration
PCH-IO Configuration
Save & Exit
Advanced
Security
Boot
Main
Chipset
Graphics Configuration
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Graphics Configuration
This section is used to configure the Network Stack settings.
Initial priority :
AUTO: PEG->PCIe->PCI-
>IGFX
IGFX: IGFX->PEG-
>PCIe->PCI
PEG: PEG->PCIe->PCI-
>IGFX
PCI: PCI->PCIe->PEG-
>IFGX
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Graphics Configuration
Primary Display
Internal Graphics
Chipset
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
[Auto]
[Auto]
Enable or Disable the
Root Port
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
PEG Port Configuration
PCIE1
Enable Root Port
Max Link Speed
►
PEG Port Feature Configuration
Chipset
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Not Present
[Enabled]
[Auto]