95
3
BIOS Setup
3.1.8.9 DIMM Voltage Control
This field allows you to manually select higher voltage supplied
to the DRAM. If you want to use the DRAM’s default voltage,
leave this field in its default setting.
Important:
Although this function is supported, we do not recommend that
you use a higher voltage because unstable current may be sup-
plied to the system board causing damage.
3.1.8.10 AGP Voltage Control
This field allows you to manually select higher voltage supplied
to the AGP. If you want to use the default voltage, leave this field
in its default setting.
Important:
Although this function is supported, we do not recommend that
you use a higher voltage because unstable current may be sup-
plied to the system board causing damage.
3.1.8.11 CSA LAN (Giga-LAN)
This field is used to enable or disable the
onboard CSA Gigabit
LAN.
3.1.8.12 CSA LAN Boot ROM
Enable this field if you wish to use the boot ROM (instead of a
disk drive) to boot-up the system and access the local area net-
work directly.
If you wish to change the boot ROM’s settings, type the <Shift>
and <F10> keys simultaneously when prompted during boot-up.
Take note: you will be able to access the boot ROM’s program
(by typing <Shift> + <F10>) only when this field is enabled.
3.1.8.13 RAID Device Control
This field is used to enable or disable the
onboard HighPoint
RAID controller.
