1
Introduction
13
1.1.3 Intelligence
CPU Fan Protection
The CPU Fan Protection function has the capability of monitoring
the CPU fan when the system boots. Once it has detected that the
CPU fan did not rotate, 5 warning beeps will sound then the sys-
tem will automatically power-off. This preventive measure has been
added to protect the CPU from damage and insure a safe comput-
ing environment.
Automatic Chip/Second Fan Off
The chip fan and second fan will automatically turn off once the
system enters the Suspend mode.
Dual Function Power Button
Depending on the setting in the “Soft-Off By PWR-BTTN” field of
the Power Management Setup, this switch will allow the system
to enter the Soft-Off or Suspend mode.
Wake-On-Ring
This feature allows the system that is in the Suspend mode or
Soft Power Off mode to wake-up/power-on to respond to calls
coming from an external modem or respond to calls from a
modem PCI card that uses the PCI PME (Power Management
Event) signal to remotely wake up the PC.
Important:
If you are using a modem add-in card, the 5VSB power source
of your power supply must support a minimum of
≥
720mA.
