DFI DL310-C226 Скачать руководство пользователя страница 76

Страница: 76 / 101

www.dfi .com

Chapter 6 RAID

Chapter 6

Step 4: Install the RAID Driver During OS Installation

The RAID driver must be installed during the Windows

XP or Windows

2000 installation us-

ing the F6 installation method. This is required in order to install the operating system onto a

hard drive or RAID volume when in RAID mode or onto a hard drive when in AHCI mode.

1. Start Windows Setup by booting from the installation CD.

2. Press <F6> when prompted in the status line with the ‘Press F6 if you need to install a

third party SCSI or RAID driver’ message.

3. Press <S> to “Specify Additional Device”.

4. At this point you will be prompted to insert a floppy disk containing the RAID driver. Insert

the RAID driver diskette.

5. Locate for the drive where you inserted the diskette then select RAID or AHCI controller

that corresponds to your BIOS setup. Press <Enter> to confirm.

You have successfully installed the driver. However you must continue installing the OS. Leave

the floppy disk in the floppy drive until the system reboots itself because Windows setup will

need to copy the files again from the floppy disk to the Windows installation folders. After

Windows setup has copied these files again, remove the floppy diskette so that Windows setup

can reboot as needed.

Step 5: Install the Intel Rapid Storage Technology Utility

The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows

RAID volume management (create, delete, migrate) from within the operating system. It will

also display useful SATA device and RAID volume information. The user interface, tray icon

service and monitor service allow you to monitor the current status of the RAID volume and/

or SATA drives. It enables enhanced performance and power management for the storage

subsystem.

1. Insert the provided CD into an optical drive.

2. Click “Intel Rapid Storage Technology Utility” on the main menu.

4. Read the license agree-

ment and click “I accept

the terms in the License

Agreement.“ Then, click

Next.

3. Setup is ready to install

the utility. Click Next.

Содержание DL310-C226






































































































Результаты поиска

Содержание DL310-C226

Отзывы:

Похожие инструкции для DL310-C226

Бренды по названию

Популярные бренды

DFI DL310-C226, Руководство пользователя

Результаты поиска

Содержание DL310-C226

Отзывы:

Похожие инструкции для DL310-C226

Бренды по названию

Популярные бренды