www.dfi .com
43
Chapter 3 BIOS Setup
Chapter 3
System Agent (SA) Configuration
This section is used to configure the parameters of System Agent.
Check to enable VT-d
function on MCH.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
System Agent Bridge Name
System Agent RC Version
VT-d Capability
VT-d
Graphics Confi guration
NB PCIe Confi guration
Memory Confi guration
Haswell
1.5.0.0
Supported
[Enabled]
Chipset
VT-d
Checks to enable VT-d function on MCH.
Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit
Primary Display
Auto When the system boots, it will auto detects the display device.
IGFX When the system boots, it will first initialize the onboard VGA.
PEG When the system boots, it will first initialize the PCI Express x16 graphics card.
Internal Graphics
Keeps IGD enabled based on the setup options
.
Graphics Configuration
This field configures the graphics settings.
Select which of IGFX/
PEG/PCI Graphics
device should be Primary
Display.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Graphics Confi guration
IGFX VBIOS Version
IGfx Frequency
Primary Display
Internal Graphics
DVMT Pre-Allocated
DVMT Total Gfx Mem
LCD Control
2171
700 MHz
[Auto]
[Auto]
[32M]
[256M]
Chipset
Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit
