DFI CS331-C246, Руководство пользователя, Страница: 49 / 76

www.dfi.com CS331-C246/Q370
Chapter 3 - BIOS
49
► Save & Exit
Reset the system after
saving the changes
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Save Options
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Boot Override

Save Setting to file

Restore Setting from file
Chipset Advanced Main Security Boot Save & Exit
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Save Changes and Reset
To save the changes, select this field and then press <Enter>. A dialog box will
appear. Select Yes to reset the system after saving all changes made.
Discard Changes and Reset
To discard the changes, select this field and then press <Enter>. A dialog box will
appear. Select Yes to reset the system setup without saving any changes.
Restore Defaults
To restore and load the optimized default values, select this field and then press
<Enter>. A dialog box will appear. Select Yes to restore the default values of all the setup op-
tions.
Save Setting to file
Select this option to save BIOS configuration settings to a USB flash device.
Restore Setting from file
This field will appear only when a USB flash device is detected. Select this field to
restore setting from the USB flash device.
Boot Graphics Resource
Table
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Boot Configuration
Setup Prompt Timout
Bootup NumLock State
Quiet Boot
Boot Option Priorities
BGRT Logo
Driver Option Priorities
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
1
[On]
[Enabled]
[Disabled]
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Save & Exit Chipset Security
Boot
► Boot
Setup Prompt Timeout
Set the number of seconds to wait for the setup activation key. 65535 (0xFFFF) denotes indefi-
nite waiting.
Bootup NumLock State
Select the keyboard NumLock state: On or Off.
Quiet Boot
This section is used to enable or disable quiet boot option.
Boot Option Priorities
Select the system boot order.
BGRT Logo
It is used to enable or disable to support display logo with ACPI BGRT table.
Driver Option Priorities
Select the driver boot order.
Note:
If “Boot option filter” of “CSM Configuration” is set to “UEFI and Legacy” or “UEFI
only” and “Quiet Boot” is set to enabled, “BGRT Logo” will show up for configura-
tion. Refer to the Advanced > CSM Configuration for more information.