www.dfi.com
CS331-C246/Q370
Chapter 2
- Hardware Installation
21
Graphics Interfaces
The display ports consist of the following:
• 1 HDMI port
• 1 DVI-I (DVI-D signal) port
• 1 DP++ port
▲
DP++
2
2
G2
I C
Ba
ttery
▼
DVI-I (DVI-D signal)
▼
HDMI
HDMI Port
The HDMI port which carries both digital audio and video signals is used to connect a LCD
monitor or digital TV that has the HDMI port.
DVI-I (DVI-D Signal) Port
The DVI-I port is used to connect a LCD monitor. This port supports DVI-D signal only. Con-
nect the display device’s cable connector to the DVI-I port. After plugging the cable connector
into the port, gently tighten the cable screws to hold the connector in place.
DP++ Port
The DP++ port which carries both digital audio and video signals is used to connect a LCD
monitor or a digital TV that has the DP++ port.
BIOS Setting
Configure the display devices in the Chipset menu (“Graphics Configuration” submenu) of the
BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the graphics driver. Refer to the chapter 4 for more information.
►
Rear Panel I/O Ports
