www.dfi.com
CS331-C246/Q370
Chapter 3
- BIOS
38
Trusted Computing
This section configures settings relevant to Trusted Computing innovations.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Configuration
Security Device Support
NO Security Device Found
Advanced
[Enable]
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Enables or Disables
BIOS support for secu-
rity device. O.S will not
show Security Device.
TCG EFI protocol and
INT1A interface will not
be available.
Security Device Support
This field is used to enable or disable BIOS support for the security device. O.S will not show
the security device. TCG EFI protocol and INT1A interface will not be available.
NCT6116D Super IO Configuration
This section is used to configure the I/O functions supported by the onboard Super I/O chip.
WatchDog Timer Unit
Selection
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
NCT6116D Super IO Configuration
Super IO Chip
WatchDog Timer Unit
SuperIO WatchDog Timer
Serial Port 1 Configuration
Serial Port 2 Configuration
Serial Port 3 Configuration
Serial Port 4 Configuration
Advanced
NCT6106D
[Second]
0
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
WatchDog Timer Unit
Select WatchDog Timer Unit: Second or Minute.
SuperIO WatchDog Timer
Set SuperIO WatchDog Timer Timeout value. The range is from 0 (disabled) to 255.
Serial Port 1 Configuration to Serial Port 6 Configuration
Set the parameters of serial port 1 (COM 1) to serial port 4 (COM 4).
►
Advanced
►
Advanced