61
3
BIOS Setup
APIC Mode
Leave this field in its default setting.
HDD S.M.A.R.T. Capability
The system board supports SMART (Self-Monitoring, Analysis and Reporting
Technology) hard drives. SMART is a reliability prediction technology for ATA/IDE
and SCSI drives. The drive will provide sufficient notice to the system or user to
backup data prior to the drive’s failure. The default is Disabled. If you are using
hard drives that support S.M.A.R.T., set this field to Enabled. SMART is supported
in ATA/33 or later hard drives.
Report No FDD For WIN 95
Yes
Will report no FDD for Windows® 95.
No
Will not report no FDD for Windows® 95.
Small Logo(EPA) Show
Enabled
The EPA logo will appear during system boot-up.
Disabled
The EPA logo will not appear during system boot-up.
Onboard LAN Boot ROM
Enable this field if you wish to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly.
If you wish to change the boot ROM’s settings, type the <Shift> and <F10> keys
simultaneously when prompted during boot-up. Take note: you will be able to ac-
cess the boot ROM’s program (by typing <Shift> + <F10>) only when this field
is enabled.
