www.dfi.com
Chapter 3 BIOS Setup
Chapter 3
29
USB Configuration
This configures the parameters of the USB xHCI (eXtensible Host Controller Interface).
USB3.0 Support
Disabled
Disable USB XHCI Pre-Boot Support.
Enabled
Enable USB XHCI Pre-Boot Support.
SATA Configuration
This section configures the SATA controller.
DISABLED: Disables
SATA Controller
ENABLED: Enables SATA
Controller
SATA Configuration
SATA Controller
HDC Configure As
Serial ATA Port 0
Serial ATA Port 1
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
<Enabled>
<AHCI>
[Not Installed]
[Not Installed]
SATA Controller
Enable or disable the Serial ATA controller.
HDC Configures As
The mode selection determines how the SATA controller(s) operates.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-
face).
Serial ATA Port 0, and 1
This field is used to enable or disable the serial ATA port.
Enable/Disable the USB
XHCI PreBoot Support
USB Confuguration
USB3.0 Support
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
<Enabled>