DFI AL051, Руководство пользователя

Страница: 33 / 43

www.dfi.com
33
Chapter 3 BIOS Setup
Chapter 3
www.dfi.com
33
Chapter 3 BIOS Setup
Security
When Hidden, don’t ex -
poses TPM to 0
Current TPM Device
TPM State
TPM Availability
TPM Operation
Clear TPM
Supervisor Password
Set Supervisor Password
Main Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH2O Setup Utility
Security Boot Exit
Rev. 5.0
<TPM 2.0 (FTPM)>
All Hierarchies Enabled, UnOwned
<Available>
<No Operation>
[ ]
Not installed
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
No Operation No changes to current state.
Enable Enable and activate TPM.
Disable Disable and activate TPM.
Clear TPM
Remove all TPM context associated with a specific owner.
Set Supervisor Password
Set the supervisor’s password and the length of the password must be greater than
one character.
Boot
Setup Prompt Timeout
Setup the number of seconds that the firmware will wait before booting the original
default boot selection.
Numlock
Select the power-on state for numlock.
Quiet Boot
Enable or disable booting in text mode.
Network Stack
This field is used to enable or disable network stack.
PXE Boot capability
Disabled Suppoort Network Stack
UEFI IPv4/IPv6
USB Boot
Enable or disable booting to USB boot devices.
The number of seconds
that the firmware will wait
before booting the original
default boot selection.
Setup Prompt Timeout
Numlock
Quiet Boot
Network Stack
PXE Boot capability
USB Boot
Main Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH2O Setup Utility
Security Exit
Rev. 5.0
[0]
<On>
<Disabled>
<Disabled>
<Disabled>
<Enabled>
Boot