www.dfi.com
15
Chapter 2 Hardware Installation
Chapter 2
Rear Panel I/O Ports
The rear panel I/O consists of the following ports:
• 1 2-pin terminal block (DC 12V)
• 1 Mini DP++ port
• 2 USB 3.1 Gen 1 ports
• 2 GbE (RJ-45)
• 1 VGA port
2-Pin Terminal Block (DC 12V)
2-Pin Terminal Block (DC 12V)
This 2-pin terminal block is considered a low power solution. Connect a power adapter and a
2-pole terminal to DC Jack cable to this terminal block. Using a voltage more than the recom-
mended range may fail to boot the system or cause damage to the system board.
3
-
+
USB 3.1 Gen 1
LAN 2
Mini DP++
2-Pin
Terminal
Block
(DC 12V)
VGA
LAN 1
+
-
