DFI 586ITXD, Руководство пользователя

Страница: 27 / 90

2
Award BIOS Setup Utility
27
Soft-Off by PWR-BTTN
This category allows you to select the method of powering off your
system.
Hold 4 Sec. This function will depend on the option selected in the
“Suspend Mode Option” field.
1. If the “Suspend Mode Option” field is set to
“PowerON Suspend”, once you push the power
button, it enters the Suspend mode and if released
in less than 4 sec., the system returns to normal.
The purpose of this function is to prevent the
system from powering off in case you accidentally
“hit” or pushed the power button. Pushing the
power button for more than 4 seconds will power
off the system.
2. If the “Suspend Mode Option” field is set to
“Suspend to Disk”, once you push the power
button, the system will store all information about
your current operating session onto your hard
drive and power off the system.
Instant-Off Default setting. Pressing and then releasing the power
button will power off the system.
Resume By Ring
Enabled Enables the Modem Ring-on feature. This allows your
system to power on to respond to incoming calls. Make
sure to select an IRQ channel for the external modem in
the “Modem Use IRQ” field and set JP11according to the
COM port where your modem is connected.
Disabled Disables the Modem Ring-on feature. Your system will not
respond to incoming calls.
Resume By Alarm
Enabled When Enabled, you can set the date and time you would
like the Soft Power Down (Soft-Off) PC to wake up.
“Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm”
will appear right below this field.
Disabled Disables the automatic wake up function. (default)