- -
1102/V1/0110
10. t
roublEshooting
Error
Cause
Solution
The motor does not start
after switching it on, there
is no signal sound
The connection between
battery and speed controller
is loose.
The connection between
motor and speed controller
is loose.
Check the plug connection.
Replace the contacts.
Check the plug connection.
Replace the contacts.
The motor does not start
after switching it on, there
is an alarm
(double alarm, repeated at
1 second intervals).
Input voltage too high or
too low.
Check the charge of the bat-
tery pack.
The motor does not start
after switching it on, there
is an alarm
(single alarm, repeated
about every 2 seconds).
Input signal is faulty.
Check sender and receiver.
Check the connection of
channel 2 of the receiver
(accelerator/brake signal) to
the speed controller.
The motor is running in the
reverse direction.
The connection cables
between motor and speed
controller have been swit-
ched.
The chassis provides for ano-
ther installation direction of
the motor.
Switch any two connection
cables of motor to speed
controller.
Program the other rotation
direction in programming
step 11.
Содержание KL-80
Страница 82: ...82 1102 V1 0110...
Страница 83: ...83...
