Dextone JN501, Руководство оператора

Страница: 42 / 46

12 11
|
6 filter system (Fig. 13)
Mode C: Wet vacuuming
Wet vacuuming
1. Insert the foam filter (Fig.1/Pos.19).
2. Push the vacuum hose (2) into the connection on the water tank (9) and turn this clockwise.
3. Insert the hose connection cover (Fig.1/11) into the vacuuming connection (Fig.1/ pos.25)
4 filter system (Fig. 14)
Warning! Pull out the mains plug before carrying out any adjustments, maintenance or
repair work.
Dry vacuuming -Mode A
Ensure that the dust bag (23B) is installed.
Fill the water tank (9) up to the line
Affix the hose connection cover (11) to the water tank (9).
Loosen the quick coupling (6) on both sides of the device and remove the machine head.
Install the HEPA filter (19).
Re-attach the machine head to the water tank (9).
Fit the vacuum hose (2) to the machine head.
Select the required brush or nozzle.
Dry vacuuming -Mode B
Ensure that the dust bag (23A) is installed.
Make sure no water in water tank (9)
Affix the hose connection cover (11) to the vacuuming connection (Fig.1/ pos.25)
Loosen the quick coupling (6) on both sides of the device and remove the machine head.
Install the HEPA filter (19).
Re-attach the machine head to the water tank (9).
Fit the vacuum hose (2) to the the vacuuming connection (Fig.1/ pos.26)
Select the required brush or nozzle.
Wet vacuuming (Fig.1) -Mode C
Remove the dust bag (23A or 23B or Both).
Fasten the cover (11) for the hose connection on the machine head.
Install the vacuum hose (2) with the floor nozzle (10) on the water tank (9).
Loosen the quick coupling (6) on both sides of the device and remove the machine head.
Install the foam filter (18).
Re-attach the machine head to the water tank (9).
Air blasting
1. Ensure that the water tank (Fig.1/Pos9) is completely drained and clean.
2. Push the vacuum hose (Fig.1/Pos.2) into the blast nozzle (Fig.1/Pos.14) and turn this clockwise
Tapping function
If the vacuuming power reduces during dry vacuum¬ing, press the tapping function button (Fig.1/Pos.16) a
few times to clean the HEPA filter.
OPERATION
Switching on
Tip the on/off switch (Fig.1/Pos.13) into the
─
positi¬on to switch the device on.
Switching off:
Tip the on/off switch (Fig.1/Pos.13) into the 0 position to switch the device off.
Dry vacuuming (Fig.1)
GB DE GB IT GB