08
07
|
Mode A: 3 Stage filter system dry vacuuming.
I).Installing and removing the dust bag
c.Installing brushes and nozzles
1. Select the brush or nozzle suitable for the relevant job
2. Push the telescopic vacuum pipe (Fig.1/Pos.12) into the required brush or nozzle
Floor nozzle ((Fig.1/Pos.10)
– to vacuum carpets , Also suitable for wet vacuuming.
Universal brush(Fig.1/Pos.20
)- for common place wet & dry using
Joint nozzle (Fig.1/Pos.21)
– for locations that are difficult to access, e.g. edges, radiators.
Brush nozzle (Fig.1/Pos.22)
– to remove dust from highly sensitive pieces of furniture or items susceptible
to scratching.
d. Inserting the filter
1. Release the quick coupling (Fig.1/Pos.6) on both sides of the device.
2. Push the selected filter in on the bottom of the machi¬ne head until it locks in place. (Fig.3)
- Foam filter (Fig.1/Pos.18): suitable for wet vacuuming
- HEPA filter (Fig.1/Pos.19): suitable for dry vacuuming
e.Install Dust bag and hose connection
This Vacuum has three models for wet&dry vacuuming:
Mode A: 3 Stage filter system dry vacuuming (for heavy dust)
Mode B: 2 Stage filter system dry vacuuming (for normal dry vacuum)
Mode C: Wet vacuuming
Warning! As different model, will be different installation of hose and dust bag, cover, please read this part
carefully:
1. Push the clip back and pull the handle up. (Fig. 4)
2. Push the slider back. (Fig. 5)
3. Put the dust bag (Fig.6/Pos.23B )on the connection.
4. Release the slider. (Fig. 7)
II).3 filter system (Fig. 8)
GB
DE
GB
IT
GB
Содержание JN501
Страница 22: ...GB DE 18 17 VUE ÉCLATÉE GB DE GB FR ...
Страница 45: ...18 17 TECHNICAL DRAWING GB DE GB IT GB ...
