Installation
The device should be installed in accordance with the drawing on the first page of the
user manual. Any other installation position may result in serious damage to the device.
Installation should take place as close as possible to a cold water connection. The product
should be protected from the effects of frost (for example in caravans, summer houses,
etc.).
Depending on the model, the device may be installed above (DXO model) or
under (DXU model) the work top.
Frost
If there is the risk of frost in a room, the device should notbe installed in this room.
If, despite this advice, the device is installed in a room where there is a risk of
frost, the device should be emptied before the risk arises.
Wall mounting
Select the position of the heater and install the supplied bracket.
Ensure the spout will be positioned inline with the basin.
Connection to the water supply
(See illustration on page 2)
A/C
= cold water inlet side (for filling) blue.
B
= hot water outlet side (hot water demand) red.
The device is designed for use in non-pressure systems. This system allows water to be
drawn from a single discharge point. Never use a shut-off valve in the appliance’s outlet.
The connection pipes must be installed as shown in the drawing. If the
incoming mains
water supply pressure exceeds 5 bars
, a pressure reducing valve must be fitted in the
incoming cold supply pipe.
A vented tap fitting must be used for nonpressure installation.
It is important you are absolutely certain that the tap you want to connect
is vented. If any doubt, always consult your installer.
If a vented tap is not used, a build up of pressure could lead to significant
damage and thereby void the warranty!
Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
Statement of Conformity
This boiler complies with the following directives:
• 2006/95/EC Low Voltage Directive
• 2004/108/EC Electromagnetic Compatibility Directive (EMC)
• 2011/65/EC (RoHS II)
• 2009/125/EC Eco design
• (EC) No. 814/2013
The product also conforms to the following harmonised European standards:
• EN 55014-1:2006 + A1:2009 + A2:2011
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 61000-3-2:2006 + A1:2009 + A1:2009
• EN 61000-3-3:2013
• EN 62233:2008
• EN 50581:2012
• EN 60335-1:2012 + AII:2014
• EN 60335-2-21:2003 + A1:2005 + A2:2008
2. Mounting Instructions
Environment
This device is delivered in sturdy packaging in order to avoid damage during
transport. This packaging consists mainly of recyclable materials. We request that
you dispose of the packaging accordingly for recycling purposes.
Disposal of the appliance
Old appliances must not be disposed of in your household waste! Every
consumer is legally obliged to dispose of old appliances separately from their
household waste and to take them, for example, to a collection point in their local
communityor local district. Old electrical appliances will be accepted there free
of charge. This ensures that the old appliances are properly recycled and any
negative impacts on the environment are avoided. This is why electrical
appliances are marked with the symbol shown on the left.
DXO5LV / DXU5LV DELUX VENTED WATER HEATERS
180mm
Side View
320mm
W
all
Wall mount bracket
for over sink unit
