77
Guide rapide
/
VALUE/REV TYPE
OBOE
TRUMPET
FLUTE
VIOLIN
REVERB
PLAYER
CLASSICO L3 est équipé de 7 types de réverbérations
.
1.
Appuyer sur le bouton [TYPE] pour sélectionner le type de room size.
L’indicateur [VALUE/REV TYPE] affiche le type de pièce.
2.
Tourner le bouton [DEPTH] pour régler la quantité de réverbération.
Choisir la Réverbération (REVERB)
1.
Connecter une mémoire USB.
2.
Appuyer sur le bouton [
!
] pour commencer à enregistrer.
3.
Jouer votre morceau.
4.
Appuyer sur le bouton [
!
] pour arrêter l’enregistrement.
5.
Appuyer sur le bouton [
*-,
] pour lire le morceau.
6.
Appuyer une nouvelle fois sur le bouton [
*-,
] pour suspendre
la lecture du morceau.
7.
Appuyer sur le bouton [
$
] pour retourner au début du
morceau.
Pour plus d’informations, prière de consulter le mode d’emploi.
Enregistrer et jouer un morceau
1.
Tourner le bouton [TONE] pour régler l’éclat du son. Tourner à
droite pour augmenter l’éclat du son. Tourner à droite pour le
rendre plus doux.
L’indicateur [VALUE/REV TYPE] affiche la valeur d’éclat.
Réglage de l’éclat du son
Division PEDAL, MANUAL I, MANUAL II
Ces boutons permettent de sélectionner un son d’orchestre pour la division
correspondante. On peut ajouter l’un de ces sons à la section d’orgue. Chaque
catégorie contient un maximum de 4 variations de son (prière de consulter le mode
d’emploi).
1.
Appuyer sur l’un des boutons de la section d’orchestre pour rappeler un son.
L’indicateur s’éclaire et le son est sélectionné.
Sélection d’un son d’orchestre
Utilisation des mémoires (enregistrements)
CLASSICO L3 est muni de quatre mémoires et de trois espaces (pour un total de 12 mémoires) auxquelles on peut accéder via le piston de mémoire [M1/2/3] et
[1]~ [4]. Appuyer sur le piston [0] pour effacer les configurations de la mémoire sélectionnée pour le moment et faire taire tous les sons d’orgue et d’orchestre.
PHONES
AUDIO IN
Prière de se reporter au mode d’emploi pour la manière d’importer et exporter les enregistrements vers une mémoire USB.
Renommer une mémoire
Sauvegarder une mémoire
1.
Appuyer sur le piston [M1/2/3] pour sélectionner l’espace de mémoire.
Le bouton rond s’allume.
2.
Appuyer sur l’un des pistons [1]~ [4] pour rappeler la mémoire.
1.
Appuyer sur le piston [M1/2/3] pour sélectionner l’espace de mémoire qu’on souhaite
sauvegarder.
Le bouton rond s’allume.
2.
Appuyer sur le piston [1]~ [4] et le maintenir pour sauvegarder la mémoire.
1.
Appuyer simultanément sur les
boutons [
*-,
] et [SONG].
Morceau de démonstration
Sélection d’un son d’orgue
Division PEDAL, MANUAL I, MANUAL II
Ces touches permettent de sélectionner un son d’orgue
pour la division correspondante. Plusieurs sons d’orgue
(touches) peuvent être utilisés en même temps.
1.
Appuyer sur la partie inférieure d’une des touches « PEDAL », « MANUAL
I » ou « MANUAL II ».
L’indicateur s’éclaire et le son est sélectionné.
2.
Appuyer sur la partie supérieure de la touche pour désactiver le son.
L’indicateur de la touche s’éteint et le son sélectionné est désactivé.
1.
Appuyer sur un des boutons et le maintenir pour régler la section
correspondante.
2.
Tourner le bouton [TONE/LEVEL] pour régler le volume.
3.
Appuyer à nouveau sur le bouton de la section pour quitter le
mode d’édition.
Régler le Volume de chaque Section
PIANO
HARPSICHORD
TUNING
TEMPERAMENT
TRANSPOSE
Содержание Classico L3
Страница 1: ......