76
Guide rapide
6
BASS
ORCHESTRA
ORGAN
PIANO
HARPSICHORD
TUNING
TEMPERAMENT
TRANSPOSE
1.
Tourner le bouton pour régler le niveau d’entrée des
signaux reçus par les prises AUDIO IN.
Régler le niveau AUDIO IN
En commutant entre les réglages du son, on peut changer
le caractère global des tonalités et du son de l’ensemble
de l’orgue. « UTILISATEUR 1 » et « UTILISATEUR 2 » vous
permettent d’importer des sons, qui peuvent être téléchargés
du site www.dexibell.com.
1.
Appuyer plusieurs fois sur le bouton jusqu’à ce que la configuration
souhaitée du son s’éclaire
.
Changer le réglage du son d’orgue
La tonalité de référence peut être réglée en choisissant l’un
des sept paramètres classiques fixes : 392 Hz, 415 Hz, 432 Hz,
440 Hz (par défaut), 442 Hz, 444 Hz, 466 Hz.
Quand on joue le CLASSICO L3 en même temps que d’autres
instruments dans un groupe, on peut régler la tonalité
(bouton [FINE]) pour aller avec les autres instruments, si
nécessaire.
1.
Appuyer plusieurs fois sur le bouton [PRESET] jusqu’à ce que l’indicateur
de la tonalité souhaitée s’éclaire.
2.
Tourner le bouton [FINE] pour régler la tonalité, si nécessaire.
Sélectionner un tuning classique
CLASSICO L3 permet de changer facilement de
tempérament.
1.
Appuyer plusieurs fois sur le bouton [SCALE] jusqu’à ce que l’indicateur
du tempérament souhaité s’éclaire.
Sélectionner un tempérament (SCALE)
Cette fonction améliore le son des familles CHAÎNE et CHŒUR en
ajoutant des notes à l’accord joué
.
1.
Sélectionner un son des familles CHAÎNE et CHŒUR.
2.
Appuyer sur le bouton [CHORD ENHANCER] pour activer la fonction.
Le voyant du bouton [ENHANCER] s’allume et la fonction Chord Enhancer est activée.
3.
Jouer un accord sur le clavier.
La fonction Chord Enhancer ajoute des notes à l’accord joué
.
FUNCTION/EXIT
1.
Appuyer sur le bouton [FUNCTION/EXIT] et le maintenir pour accéder au
mode de fonction.
2.
Appuyer sur les touches pour activer et désactiver les fonctions.
Améliorer le son (CHORD ENHANCER)
Il est possible de faire la transposition du morceau sans changer la position des
touches qu’on joue.
1.
Utiliser les boutons [-] [+] pour régler la transposition.
L’indicateur montre la valeur de transposition.
Changement de la tonalité du clavier (TRANSPOSE)
0
1
2
Son d’orgue
Son d’orchestre
Son d’orchestre
Son d’orgue
Sélection d’un son de piano
Division MANUAL I
Ces boutons permettent de sélectionner les sons de piano pour la
division correspondante. La section de Piano ne peut pas être utilisée
en même temps que celle d’orgue et celle d’orchestre. Chaque
catégorie contient un maximum de 4 variations de son (prière de
consulter le mode d’emploi).
1.
Appuyer sur l’un des boutons de la section « PIANO » pour rappeler un son.
L’indicateur s’éclaire et le son est sélectionné.
Содержание Classico L3
Страница 1: ......