7
4.
Fitting
Included in the supply package is the
and
or
, a
or a
and one or four slave drives.
The components are
prewired and receive plugs/ready to plug in.
When
, take care
of the battery backup
system. Caution the battery backup system contains a residual charge!
During
take care not to activate a function on the handset in
advertenently the
could otherwise cause
the drive to
drive control unit
depending on the order a
handset
foot switch
locking device
supervisor
unpacking
not to damage the cable
installation
residual charge of the battery back up
operate!
a)
Installation
A battery backup system can also be connected (optional).
If ordered, the optional battery backup system is supplied ex factory as an individual
unit, i.e. not connected. The connection diagram for the battery backup system is
shown on page 18.
The
drive control unit
can be directly screwed to the
(MEGAMAT P/MEGAMAT 2) with the
via
.
Alternatively, the
drive control unit is screwed to the application at the
4 fixing points using suitable screws and plain washers (e.g. screw M5x15,
plain washer M5 and nut M5). The surface onto which the controls are
mounted must be level and flat.
MCL
(1)
drive (2)
flange guide (4)
two straps (3)
MCL
Option 1:
Option 2:
fixing points
45,3
101,6
54,02
76
fixing points
1
2
4
3
Caution!
Only ever connect or disconnect electrical components when they are voltage-free.
