20
EnglIsh
the power input of your charger (see
Technical Data
). The
minimum conductor size is 1 mm
2
; the maximum length
is 30 m.
When using a cable reel, always unwind the cable completely.
SAVE THESE INSTRUCTIONS
Chargers
D
e
WALT
chargers require no adjustment and are designed to be
as easy as possible to operate.
Important Safety Instructions for All Battery
Chargers
SAVE THESE INSTRUCTIONS:
This manual contains important
safety and operating instructions for compatible battery
chargers (refer to
Technical Data
).
• Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
battery pack.
WARNING:
Shock hazard. Do not allow any liquid to get
inside charger. Electric shock may result.
WARNING:
We recommend the use of a residual current
device with a residual current rating of 30mA or less.
CAUTION:
Burn hazard. To reduce the risk of injury,
charge only
D
e
WALT
rechargeable batteries. Other types of
batteries may burst causing personal injury and damage.
CAUTION:
Children should be supervised to ensure that
they do not play with the appliance.
NOTICE:
Under certain conditions, with the charger
plugged into the power supply, the exposed charging
contacts inside the charger can be shorted by foreign
material. Foreign materials of a conductive nature such
as, but not limited to, steel wool, aluminum foil or any
buildup of metallic particles should be kept away from
charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean
•
DO NOT attempt to charge the battery pack with any
chargers other than the ones in this manual.
The charger
and battery pack are specifically designed to work together.
•
These chargers are not intended for any uses other than
charging
D
e
WALT
rechargeable batteries.
Any other uses
may result in risk of fire, electric shock or electrocution.
•
Do not expose charger to rain or snow.
•
Pull by plug rather than cord when disconnecting
charger.
This will reduce risk of damage to electric plug
and cord.
•
Make sure that cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
•
Do not use an extension cord unless it is absolutely
necessary.
Use of improper extension cord could result in risk
of fire,electric shock, or electrocution.
•
Do not place any object on top of charger or place
the charger on a soft surface that might block the
ventilation slots and result in excessive internal heat.
Place the charger in a position away from any heat source. The
charger is ventilated through slots in the top and the bottom
of the housing.
•
Do not operate charger with damaged cord or plug—
have them replaced immediately.
•
Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way.
Take it
to an authorised service centre.
Batteries
Chargers/Charge Times (Minutes)
Cat #
DC
Weight
Batteries
Chargers/Charge Times (Minutes)
Cat #
V
DC
Ah
Weight
kg
DCB107
DCB113
DCB115
DCB118
DCB132
DCB119
DCB546
18/54
6.0/2.0
1.05
270
140
90
60
90
180
DCB547
18/54
9.0/3.0
1.25
420
220
140
85
140
270
DCB181
18
1.5
0.35
70
35
22
22
22
45
DCB182
18
4.0
0.61
185
100
60
60
60
120
DCB183/B
18
2.0
0.40
90
50
30
30
30
60
DCB184/B
18
5.0
0.62
240
120
75
75
75
150
DCB185
18
1.3
0.35
60
30
22
22
22
40
DCB187
18
3.0
0.48
140
70
45
45
45
90
DCB141
14.4
1.5
0.30
70
35
22
X
22
45
DCB142
14.4
4.0
0.54
185
100
60
X
60
120
DCB143
14.4
2.0
0.30
90
50
30
X
30
60
DCB144
14.4
5.0
0.52
240
120
75
X
75
150
DCB145
14.4
1.3
0.30
60
30
22
X
22
40
DCB125
10.8
1.3
0.20
60
30
22
X
22
40
DCB127
10.8
2.0
0.20
90
50
30
X
30
60
