DeWalt XR Li-ION DCF622, Оригинальное руководство пользователя

Страница: 32 / 140

30
EnGLIsh
Discard the battery pack with due care for
the environment.
Charge D
e
WALT battery packs only with designated
D
e
WALT chargers. Charging battery packs other than
the designated D
e
WALT batteries with a D
e
WALT
charger may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCF622 operates on an 18 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to
Technical Data for
more information.
Package Contents
The package contains:
1 Cordless self-drilling screwdriver
1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
Date Code Position (Fig. A)
The date code 13 , which also includes the year of manufacture,
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A, C)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
6.35 mm hex quick-change chuck
2
Quick-change sleeve
3
Adjustment collar
4
MAX/MIN adjustment range
5
Clutch collar
6
Forward/reverse control lever
7 Variable speed trigger switch
8
Lock-on button
9 LED worklight
10
Battery release button
11 Battery pack
12
Belt hook
13 Date code
14
Fuel gauge
Intended Use
Your self-drilling screwdriver has been designed for
driving self-drilling fasteners in metal-to-metal roofing or
sheeting applications.
DO nOT
use under wet conditions or in the presence of
flammable liquids or gases.
This self-drilling screwdriver is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
WARNING: Use only D
e
WALT battery packs and chargers.
Inserting and Removing the Battery Pack
from the Tool (Fig. D)
nOTE: Make sure your battery pack
11
is fully charged.