DeWalt XR DCH832, Оригинальное руководство пользователя

Страница: 34 / 148

32
EngLIsh
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
WARNING: Use only D
e
WALT D
e
WALT battery packs
and chargers.
Electronic Speed and Impact Control (Fig. A)
The electronic speed and impact control allows the use of
optimal tool control for precise chiseling.
To set the electronic speed and impact control dial
10 , turn the
dial to the desired level. The higher the number, the greater the
speed and impact energy. Dial settings make the tool extremely
flexible and adaptable for many different appli cations. The
required setting depends on the chisel size and hardness of
material being chiselled.
• When chiselling in soft, brittle materials or when minimum
break‑out is required, set the dial to a low setting;
• When breaking in harder materials, set the dial to a
high setting.
D
e
WALT Tool Tag Ready (Fig. A)
Optional Accessory
Your hammer comes with mounting holes
11
and
fasteners 12 for installing a D
e
WALT Tool Tag. You will need a
T20 bit tip to install the tag. The D
e
WALT Tool Tag is designed
for tracking and locating professional power tools, equipment,
and machines using the
D
e
WALT Tool Connect™ app. For proper
installation of the D
e
WALT Tool Tag refer to the D
e
WALT Tool
Tag manual.
Active Vibration Control (AVC) System
For best vibration control, hold the tool as described in Proper
Hand Position and apply just enough pressure so the damping
device on the main handle is approximately mid stroke.
The active vibration control neutralises rebound vibration from
the hammer mechanism. Lowering hand and arm vibration,
it allows more comfortable use for longer periods of time and
extends the life of the unit.
The hammer only needs enough pressure to engage the active
vibraton control. Applying too much pressure will not make
the tool drill or chip faster and active vibration control will
not engage.
Soft Start Feature
The soft start feature allows the impact rate to build up more
slowly, thus preventing the chisel or point from “bouncing”
around on the masonry when starting up.
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Trigger switch
2
Bail/loop style auxiliary handle
3 Front barrel (collar)
4
Mode selector dial
5 Main handle
6
Bit holder
7 Sleeve
8
Battery pack
9 Battery release button
10
Speed dial
11
D
e
WALT tool tag mounting holes
Intended Use
The DCH832 and DCH892 heavy‑duty chipping hammers are
designed for heavy‑duty chipping and chasing applications.
DO nOT use under wet conditions or in presence of flammable
liquids or gases.
These heavy‑duty chipping hammers are professional power
tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Date Code Position (Fig. B)
The date code 15 , which also includes the year of manufacture,
is printed into the housing.
Example:
2021 XX XX
Year and Week of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection.
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
nOTE: Make sure your battery pack 8 is fully charged.
To Install the Battery Pack into the Tool Handle
1. Align the battery pack with the rails inside the tool’s
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.