DeWalt XR DCH832, Оригинальное руководство пользователя

Страница: 27 / 148

25
EngLIsh
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
Heavy-Duty Chipping Hammer
DCH832, DCH892
D
e
WALT declares that these products described under
Technical Data are in compliance with: 2006/42/EC,
EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT at
the following address or refer to the back of the manual.
2000/14/EC, Electrical concrete breaker (hand‑held), m ≤ 15 kg,
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D‑90431
Nürnberg, Germany, Notified Body ID No.: 0197
Level of sound power according to 2000/14/EC (Article 12,
Annex III, No. 10; m ≤ 15 kg):
L
WA
(measured sound power level)
DCH832 103 dB
DCH892 104 dB
L
WA
(guaranteed sound power level) 103 dB
Markus Rompel
Vice President of Engineering, PTE‑Europe
D
e
WALT , Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
01.12.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
DCH832 DCH892
Voltage V
DC
54 54
Type 1 1
Battery type Li‑Ion Li‑Ion
No‑load beats per minute bpm 1450–2900 1105–2210
Single impact energy (EPTA 05/2009) J 10.5 19.4
Variable Speed Dial Yes Yes
Variable Speed Dial Positions 7 7
Dust Extractor DWH051 DWH051
Bit holder SDS max
®
SDS max
®
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP) MHz
mW
433
0.03
433
0.03
Length mm 556 627
Width mm 112 115
Height mm 253 266
Weight (without battery pack) kg 6.5 8.9
Noise values and vibration values (triax vector sum) according to EN60745‑2‑6:
L
PA
(emission sound pressure level) dB(A) 92 93
L
WA
(sound power level) dB(A) 103 104
K (uncertainty for the given
sound level) dB(A) 3 3
Chiselling
Vibration emission value a
h,Cheq
=
m/s² 8.7 9.4
Uncertainty K = m/s² 1.5 1.5
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
Congratulations!
You have chosen a D
e
WALT tool. Years of experience, thorough
product development and innovation make D
e
WALT one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
HEAVY‑DUTY CHIPPING HAMMER
DCH832, DCH892