DeWalt D25893, Оригинальное руководство пользователя

Страница: 9 / 12

7
English
Proper hand position requires one hand on the mounted side
handle
2 , with the other hand on the main handle 5 .
Mode Selection (Fig. E)
WARNING: Do not select the operating mode when the
tool is running. Tool must come to a complete stop before
activating the mode selector button or damage to the tool
may result.
Your tool is equipped with a mode selector dial 4 to select the
mode appropriate to desired operation.
symbol Mode Application
Bit
Adjustment
Chisel bit position adjustment
hammering/
Chipping
Light chipping, chiseling
and demolition
To Select a Mode
• Rotate the mode selector dial so that the arrow points to the
symbol corresponding for the desired mode.
nOTE: The arrow on the mode selector dial
4
must be pointing
at a mode symbol at all times. There are no operable positions
in between.
Indexing the Chisel Position (Fig. E)
The chisel can be indexed and locked into 24 different positions.
1. Rotate the mode selector switch 4 until it points towards
the position.
2. Rotate the chisel in the desired position.
3. Set the mode selector switch
4 to the “Hammering/
Chipping” position.
4. Twist the chisel until it locks in position.
Performing an Application (Fig. A, E)
WARNING: TO REDUCE THE RISK OF PERSONAL
INJURY, ALWAYS
ensure workpiece is anchored or
clamped firmly.
nOTE: Operating temperature of this tool is 7 to +40 ˚C. Using
the tool outside of this temperature range will decrease the life
of the tool.
1. Insert the appropriate chisel and rotate it by hand to lock it
into the desired position. Refer to Bit and Bit Holder .
2. Using the mode selector dial 4 , select chipping mode. Refer
to
Mode Selection .
3. Adjust the side handle 2 as necessary. Refer to Mounting
the Side Handle Assembly .
4. Place the chisel on the desired location.
5. Depress the ON/OFF rocker switch
1
.
6. To stop the hammer, release the ON/OFF rocker switch.
Proper Hand Position (Fig. D)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING:
To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Protecting the Environment
Separate collection. Products marked with this symbol
must not be disposed of with normal household waste.
Products contain materials that can be recovered
or recycled reducing the demand for raw materials.
Please recycle electrical products according to local provisions.
Further information is available at
www.2helpU.com .
After Service and Repair
D
e
WALT service centers are staffed with trained personnel to
provide customers with efficient and reliable product service.
We do not take any responsibility when you have repaired
in unauthorized service center. You can refer to the leaflet of
CONTACT CENTER LOCATOR in product package and contact
us through hotline, website or social media to find the nearest
D
e
WALT service center around you.
Optional Accessories
WARNING: Since accessories, other than those offered
by D
e
WALT , have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only
D
e
WALT recommended
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
Cleaning
WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Lubrication
Your power tool requires no additional lubrication.
MAINTENANCE
Your power tool has been designed to operate over a long
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.