Devon 1107-26DE, Руководство пользователя

Страница: 11 / 28

Manual_Revised_V1.0 Page 10
control the power tool.
11) Always wear safety glasses with side
shields. Everyday glasses may have impact
resistant lenses, but they are not safety
glasses. Following this rule will reduce the
risk of eye injury.
12) Protect your lungs. Wear a face or dust
mask if the operation is dusty. Following this
rule will reduce the risk of serious personal
injury.
13) Protect your hearing. Wear hearing
protection during extended periods of
operation. Following this rule will reduce the
risk of serious person injury.
4. POWER TOOL USE AND CARE
1 ) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
2 ) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
3 ) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk
of starting the power tool accidentally.
4 ) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
5 ) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts, and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
6 ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier
to control.
7 ) Use the power tool, accessories and tool bits
etc., in accordance with these instructions
and in the manner intended for the particular
type of power tool, taking into account
the working conditions and the work to
be performed. Use of the power tool for
operations different form intended could
result in a hazardous situation.
8) Save these instructions. Refer to them
frequently and use them to instruct others
who may use this tool. If you lend this tool
to someone else, also lend them these
instructions.
5.Service
1) Have your power tool serviced by a qualified
repair person.
2) When servicing a power tool, use only
identical replacement parts.
3) Follow instructions in the Maintenance
section of this manual. Use of unauthorized
parts or failure to follow Maintenance
instructions may create a risk of shock or
injury.
ADDITIONAL SAFETY RULES
FOR ROTARY HAMMER
1 Place the cord in rear of the tool, and keep it
far from the saw piece.
2 Clamp work piece securely with clamping
devices or a vise.
3 Swear hearing protection. Exposure to noise
will cause hearing damage.
4 Operate the machine only with the auxiliary
handle supplied. Missed operation will cause
bodily harm.
5 If there is considerable vibration or other
defects are detected in operation, stop the
machine immediately and check the machine
to determine the cause. Hold the insulated
handle surface.
6 Hold your hammer drill firmly in both hands.
7 Do not force your hammer drill, it will do a
better and safer job at the speed for which it
was designed.
8 Hold tool by insulated gripping surfaces when
performing an operation where the hammer
drill may contact hidden wiring or its own cord.
9 Wear gloves when handling hammer bits and
tool. Hammer bits and tools get hot during
operation. Gloves and frequent rest periods
will reduce risk of vibration damage to hands