35 Network configuration
devolo dLAN WiFi Outdoor
Via security ID
If you would like to manually add a new dLAN de-
vice, provide its security ID and confirm with
Start
configuration
.
4.6 LAN
You make changes to the network settings in the
LAN
area.
4.6.1Status
You can see the current LAN status of the dLAN ad-
apters here.
IPv4/IPv6
Depending on how the dLAN WiFi Outdoor is
connected to the Internet, current network infor-
mation is displayed, such as
Address
,
Subnet
mask
,
Standard gateway
and
DNS server
.
4.6.2 IPv4/IPv6
In the factory default settings, only the
Retrieve
network settings from a DHCP server
option for
IPv4
is enabled. This means that the IPv4 address is
retrieved automatically from a DHCP server. The
currently assigned network data are visible (greyed
out).
If a DHCP server is already present on the network
for assigning IP addresses (e.g. your Internet rou-
ter), you should leave the
Retrieve network set-
tings from a DHCP server
option enabled so that
the dLAN WiFi Outdoor automatically receives an
address from it.
If you want to assign a static IP address, make
entries accordingly for the
Address
,
Subnet mask
,
Default gateway
and
DNS server
fields.
Confirm your settings by clicking the
Disk
icon.
Then, restart the dLAN adapter (see Chapter
) to ensure that your changes take ef-
fect.
dLAN WiFi Outdoor.book Seite 35 Mittwoch, 30. Oktober 2019 10:47 10
