Devolo dLAN WiFi Outdoor, Руководство пользователя

Страница: 16 / 43

Introduction 16
devolo dLAN WiFi Outdoor
WiFi On/Off:
b
In the factory default settings , the WiFi set-
ting is already enabled and the WiFi encryp-
tion is set to WPA2 . The WiFi key is the unique
key of the dLAN WiFi Outdoor. You can find
this key on the inside label
.
Open the lid of the
dLAN WiFi Outdoor in order to have access
to the label and the two buttons.
b
In order to switch WiFi off , press and hold the
WiFi button longer than 3 seconds .
b
In order to switch WiFi back on , tap the WiFi
button .
Connecting WiFi devices via WPS
b
If the device is still on factory defaults , tap the
WiFi button in order to activate WPS .
b
If the WiFi connection was switched off and
you would like to activate WPS , press the
WiFi button twice ; once to switch WiFi on,
and again to activate WPS.
WPS, developed by the WiFi Alliance, is one of
the encryption standards in a WiFi network. The
objective of WPS is to make it easier to add de-
vices to an existing network. For more detailed
information, refer to Chapter
4.4.7 WiFi Pro-
tected Setup (WPS)
.
Reading the WiFi indicator light
The integrated indicator light (LED) shows the WiFi
status for the dLAN WiFi Outdoor by illuminating
and/or flashing:
WiFi LED Flashing behaviour Meaning LED status display
(web interface*)
1 White
LED Flashes at intervals of
0,1 sec. on/5 sec. off The dLAN adapter is in WPS mode
to integrate WiFi-enabled devices
via WPS. Cannot be disabled
2 White
LED Lights up steady WiFi is switched on and active. Can be disabled
dLAN WiFi Outdoor.book Seite 16 Mittwoch, 30. Oktober 2019 10:47 10