Introduction 14
devolo dLAN WiFi Outdoor
2.4.1PLC button
This button controls the following functions:
Encrypting the dLAN network
b
To encrypt your dLAN network individually,
press
each PLC button
on the connected
devices for approx.
1 second
– within 2 minu-
tes.
b
To remove a dLAN device from your network,
press the
PLC button
on the corresponding
device
for at least 10 seconds
.
For more information, refer to Chapter
moving the adapter from the network
Reading the PLC indicator light
The integrated indicator light (LEDs) shows the
dLAN status for the dLAN WiFi Outdoor by illumi-
nating and/or flashing:
Check whether the adapter is connected to the
mains supply correctly and whether the encryp-
tion process has been carried out successfully.
For more information about this, refer to
Connecting the dLAN WiFi Outdoor
PLC LED
Flashing behaviour
Meaning
LED status display
(web interface*)
1
Red LED
Lights up steady
Adapter is in the start-up
process
Cannot be disabled
2
Red LED
Flashes at intervals of 0.5
sec. (on/off)
No dLAN connection
exists
Cannot be disabled
3
Red LED
Flashes at intervals of 2
sec. (on/off)
Data transmission rate
not in optimum range *
Can be disabled
dLAN WiFi Outdoor.book Seite 14 Mittwoch, 30. Oktober 2019 10:47 10
