Devolo 200 AVeasy, Руководство пользователя

Страница: 12 / 33

Initial use
|
|
devolo dLAN 200 AVeasy
|
12
3.3.1 Control lamps (LEDs)
3.3.2 Connection
Network connection
This is the connection point on the dLAN 200 AVeasy for connecting it
to a computer or another network device with the network cable
(included).
3.3.3 Encryption button
Data encryption at the touch of a button;
For more information on the functions of the encryption button, please
see the chapter 4.1 'dLAN 200 AVeasy network encryption at the touch
of a button'.
Please note that all dLAN 200 AV devices to be connected to your network are
also connected to your household power grid. dLAN 200 AV devices switch to
Standby mode after approx. 20 minutes if no active network device such as a
computer is connected to the network port. In Standby mode, the dLAN 200 AV
device cannot be accessed via the power supply grid. As soon as the network
device (e.g. computer) connected to the network interface is switched on again,
your dLAN 200 AV can also be reached again via the power grid.
Power
green Lit steady when dLAN 200 AVeasy is operational.
orange Lit steady when the dLAN 200 AVeasy is in standby mode.
dLAN Link/Act
green Lit steady when a connection with the dLAN 200 AV network
exists; flashes when data is being sent or received via the
power grid in the dLAN 200 AV network.
red Lit steady when dLAN adapter signals are detected;
flashes when data is being sent or received via the power
grid.
orange Lit steady when connected to a dLAN 200 AV network and
dLAN adapter signals are detected;
flashes when data is being sent or received via the power
grid in the dLAN 200 AV network and dLAN adapter signals
are detected.
ETH/ACT
green Lit steady when a 100 Mbps or 10 Mbps connection to the
Ethernet network exists;
flashes when data is being transmitted.