External pedals can be connected to any of the Versakey models. The default settings of the
fitted inputs are Sustain and Expression but this can be changed.
Press the Assign button, then press the connected pedal down once. The LED screen will
display the current selection and can be adjusted using the transport section rotary knob.
Press the Enter button to confirm and save the selection.
Extra Functions
All of the Devine VersaKey models offer further functionality that is not necessarily required
to get the best out of the device, but can be useful if you want to use more advanced
functions.
Dual Mode
In Dual mode, the MIDI output can be used to send MIDI data via 2 channels. These
channels will both carry the same notes and values, but with different voices.
To activate Dual mode, press the Edit button, and then the Dual button. When Dual mode
has been activated, ‘ON will be displayed on the LED screen. The second voice and channel
can now be selected.
Dual and Split mode cannot be used at the same time. If Dual mode is ON, Split mode must
be OFF, and vice versa.
Split Mode
In Split mode, the keyboard is split into a left-side and right-side so that both sides can be
played as if there were more octaves (and the corresponding amount of keys) between the
two sides. Here, the voice and channel of each side can also be selected independently.
To activate Split mode, press the Edit button, then press the Split button. When Split mode
has been activated, ‘ON will be displayed on the LED screen. The right-side of the keyboard
can now be adjusted.
Dual and Split mode cannot be used at the same time. If Dual mode is ON, Split mode must
be OFF, and vice versa.
Split Point
While it’s useful to use Split mode to split the keyboard down the middle, it may be that only
a small part of the keyboard needs to be in a different octave or pitch. To do this, the Split
Point can be set.
The default Split Point is set to C/MIDI no.60. To change the Split Point, press the Edit
button, then press the Split button twice. The LED screen will then display the current Split
point. To change the Split Point, simply press the key at the point where you want the
keyboard to be split.
Mute
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV
Revision date and author initials: -
