The default setting for the Pedal A socket is set up for a sustain pedal. The default setting for
the Pedal B socket is set up for an expression pedal.
10. 5-pin DIN MIDI Output
This output can be used to connect and control older, more standard MIDI hardware fitted
with a 5-pin DIN port. Synthesizers are often fitted with this kind of MIDI port. When setting
up the VersaKey in this way, make sure that it is USB powered (either with a USB charger or
USB powerbank) or powered by a 5V DC power supply.
System Requirements
So that your VersaKey model functions properly when connected to your computer or
laptop, the computer or laptop must meet the minimum system requirements. If your laptop
or computer does not meet the minimum system requirements, this may cause the
VersaKey to function incorrectly.
Windows
Mac OS
Pentium 3 800 MHz or better
(laptop CPUs may require higher)
256 MB RAM
DirectX 9.0b or better
Windows XP (Service Pack 2) or better
Windows 98, ME, NT and 2000 not
supported
Macintosh G3* 800/G4 733 MHz or better
(laptop CPUs may require higher)
OS X 10.3.9 with 256 MB RAM,
OS X 10.4.2 or better with 512 MB RAM
G3/G4 accelerator cards are not supported
Always check if any software and/or external equipment that you intend to use in
combination with the VersaKey specifies any minimum system requirements.
When powering the VersaKey via USB, it is recommended to connect it directly to the USB
port of your computer or laptop and avoid using any external USB hubs.
Basic Functionality
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV
Revision date and author initials: -
