SPECIFICATIONS
Maximum WORKING PRESSURE
Universal Hose Connection
Air supply P1 :
9 bar
Atomization air:
1 / 4‘’BSP/NPS
Material supply P2 :
14 bar
Cylinder air:
1 / 4’’BSP/NPS
At the air cap :
0,7 bar
Min Cylinder Operating pressure :
4,5 bar
Material:
3 / 8’’BSP/NPS
Maximum service temperature
:
40° C
WEIGHT
:
950 g
MATERIAL of construction
Gun body
Aluminium
Gun head
Aluminium = Insert SS
Tip
Stainless
steel
Needle
Stainless steel
Fluid inlet
Stainless steel
AIR CAP (2), FLUID TIPS (3) & NEEDLES (16) SELECTION GUIDE
Air Cap Ref. 2
Fluid Tip Ref. 3
Needle Ref. 16
size
Order No.
size
Order No.
Order No.
Air Flow
l/min
Approx.
Material
flow @
0.7bar
Viscosity
range
ml/min (see
Note *)
Spray
distance
Ford No. 4
cup
Maximum
pattern
mm
13
JGHV-16-13
0.85m GX JGHV-473-GX-K
AGGS-420-GX-K
480
150-200
19-24
180
305 X 63
13
JGHV-16-13 1.0mm
FY
JGHV-473-FY-K
AGGS-420-FY-K
480
200-240
19-24
180
305 X 63
13
JGHV-16-13
1.4mm
FF
JGHV-473-FF-K
AGGS-420-FF-K
425
220-280
19-24
180
355 X 63
18
JGHV-16-18
1.4mm
FF
JGHV-473-FF-K
AGGS-420-FF-K
480
150-500
15-30
305
495 X 90
162
JGHV-16-162 1.4mm
FF
JGHV-473-FF-K
AGGS-420-FF-K
510
300-350
20-30
180
365 X 63
162
JGHV-16-162 2.0mm
DE
JGHV-473-DE-K
AGGS-420-DE-K
510
400+
30+
180
365 X 63
*NOTE:
If you need to pre-set the flow rate, when using the AGGS-522 spray gun, by jetting material without
any atomizing air it will be necessary to compensate for the back pressure. The high performance of the
AGGS-522 is obtained differently to most other HVLP guns and so it will be necessary to increase the jetted
flow by approx. 30% to give the required atomised Low rate.