DEVI Devifoil Mirror, Руководство по установке

Страница: 2 / 48

2
GB
Devifoil™ Mirror
Devifoil™ Mirror is used for keeping
the bathroom mirror mist free.
Specifications
Important:
Do not cut or pierce the foil.
Install to comply with wiring regulations.
The wiring must be covered and inacces-
sible in compliance with relevant safety
standards.
Metal parts surrounding the mirror must
be earthed and comply with regulations.
Stationary appliances without a means
of all pole disconnection from the supply
must have a disconnect device incorpo-
rated in the fixed wiring circuit.
The heating foil must be connected by
an authorised electrician.
Multiple foils fitted to a single mirror
should be wired in parallel. Ensure that
power supply is
sufficient to take the load. Do not over-
lap foils.
To avoid damage to the mirror ensure
the wall is firm, flat, level and dry, and
that the mirror surface is flat. Never rest
anything on the mirror surface that will
stop the heat dissipating.
Installation
1. If the mirror is flush to the wall cut a
recess in the wall to house the terminal
moulding.
2. Mark back of mirror where foil is to be
fitted. Ensure that mirror is clean and dry.
3. Peel off protective release paper.
4. Position one edge of the foil on the
mirror back, apply pressure evenly as
the foil is gradually lowered on to mirror
back.
5. Connect the wiring to the lighting
circuit or a separate switch.
6. Re-attach mirror to the wall.