Develop ineo+ 6500 Скачать руководство пользователя страница 12

Страница: 12 / 642

SAFETY AND IMPORTANT WARNING ITEMS

S-9

Safety Checkpoints

WARNING

• When taking a report of problems from a user, check each

part and repair properly.

A risk of product trouble, injury, and fire exists.

• Check the exterior and frame for edges, burrs, and other

damages.

The user or CE may be injured.

• Do not allow any metal parts such as clips, staples, and

screws to fall into the product.

They can short internal circuits and cause electric shock
or fire.

• Check wiring for squeezing and any other damage.

Current can leak, leading to a risk of electric shock or
fire.

• Carefully remove all toner remnants and dust from electri-

cal parts and electrode units such as a charging corona

unit.

Current can leak, leading to a risk of product trouble or
fire.

• Check high-voltage cables and sheaths for any damage.

Current can leak, leading to a risk of electric shock or
fire.

• Check electrode units such as a charging corona unit for

deterioration and sign of leakage.

Current can leak, leading to a risk of trouble or fire.

• Before disassembling or adjusting the write unit (P/H unit)

incorporating a laser, make sure that the power cord has

been disconnected.

The laser light can enter your eye, leading to a risk of
loss of eyesight.

Содержание ineo+ 6500



































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ineo+ 6500

Отзывы:

Бренды по названию

Популярные бренды

Develop ineo+ 6500, Руководство по обслуживанию

Результаты поиска

Содержание ineo+ 6500

Отзывы:

Бренды по названию

Популярные бренды