manualshive.com logo in svg

Develop ineo+ 6500, Руководство по обслуживанию

Поделиться
Скачать
Develop ineo+ 6500 Скачать руководство пользователя страница 11

SAFETY AND IMPORTANT WARNING ITEMS

S-8

3.

Servicing

Inspection before Servicing

CAUTION

• Before conducting an inspection, read all relevant docu-

mentation (service manual, technical notices, etc.) and 

proceed with the inspection following the prescribed pro-

cedure in safety clothes, using only the prescribed tools. 

Do not make any adjustment not described in the docu-

mentation.

If the prescribed procedure or tool is not used, the prod-
uct may break and a risk of injury or fire exists.

• Before conducting an inspection, be sure to disconnect 

the power plugs from the product and options.

When the power plug is inserted in the wall outlet, some 
units are still powered even if the POWER switch is 
turned OFF. Arisk of electric shock exists.

• The area around the fixing unit is hot.

You may get burnt.

Work Performed with the Product Powered On

WARNING

• Take every care when making adjustments or performing 

an operation check with the product powered.

If you make adjustments or perform an operation check 
with the external cover detached, you may touch live or 
high-voltage parts or you may be caught in moving gears 
or the timing belt, leading to a risk of injury.

• Take every care when servicing with the external cover 

detached.

High-voltage exists around the drum unit. A risk of elec-
tric shock exists.

Содержание ineo+ 6500



































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды