Develop ineo+ 6500, Руководство по обслуживанию

Страница: 618 / 642

SD-501
8. BUNDLE PROCESSING SECTION
97
Theory of Operation Ver2.0 Sep.2006
8.3.4 Bundle registration control
The paper registration operation reforms the skew at trimming.
A. Mechanism
The bundle registration motor (M12) drives the registration claws [4].
Two registration claws [4] conduct the registration by making the paper [14] contact [3] with the bundle registra-
tion plate [13] from the gutter side.
In the registration operation, the bundle press section [7] conducts the pressing by moving to the appropriate
position in accordance with the paper size. To conduct the bundle registration, the registration claws [4] press
the paper until the actuator [2] on the bundle press section comes in the upright position and the trimmer regis-
tration sensor (PS55) [1] turns ON.
The bundle exit claws [9] are located at the 180° opposite to the registration claws on the belt. M12 rotates in
the reverse direction [10] to exit the paper at the paper exit.
The home position of the registration claws [4] is detected when the registration claws push the actuator [11]
and turns ON the bundle registration home sensor (PS34) [12].
[1] Trimmer registration sensor (PS55) [8] Bundle sensor /4 (PS54)
[2] Actuator [9] Bundle exit claws
[3] Registration direction [10] Drive direction of the bundle exit tabs
[4] Registration claws [11] Actuator
[5] Left side view [12] Bundle registration home sensor (PS34)
[6] Bundle sensor /2 (PS15) [13] Bundle registration plate
[7] Bundle press section [14] Paper
15ant2c060na
[2] [1] [14]
[13]
[3]
[5]
[8]
[12]
[7] [9] [6]
[4]
[11]
[10]