Devatec ElectroVap CMC, Техническое руководство

Страница: 7 / 31

Electro
V
ap
C
MC
S
team outlet
Use only factory supplied high temperature steam hose.
For distances up to 3 m. (10 ft.) steam hose alone
may be used . For distances greater than 3 m. (10 ft.)
use insulated rigid copper tubing. All steam lines
must pitched and drained.
a - The vertical rise should be a minimum of 0.5 m (18 in.)
b - The hose should be properly supported to eliminate
c -
Steam hose
(radius of bend superior to 300 mm
- 12 ft.
)
d - Duct work.
e - Obstacle.
f -
A condensate separator is needed at this point to
drain condensate.
g - Steam hose . connection
h -
Condensate hose
important
: fill
trap
with water before
starting-up.
Unit installation
g = ø
25
Steam hose radius bend :
ø25 mm = 250 mm minimal
Number of steam outlet :
CMC 1-2-3
-4
= 1
outlet
ø 25 mm
5
Pho
tos non-contractuelles
CMC with filling cup plateform
j - Height of humidifier (s.a. page 4)
Duct applications :
To get a correct functionning of the CMC
humidifier in duct applications, the following
conditions must be fulfilled :
- duct pressure less than 100 mm (4 in.) of water
column
- in case the duct pressure is between 100 mm (4 in.)
and 250 mm (10 in.) of water column, a filling cup
plateform must be installed as per the left hand photo.