Devantech dS2824 Скачать руководство пользователя

Страница: 4 / 64

dS2824

User Manual v4.09

Documentation history

v4.01

Major update to the underlying dScript, now with functions and local variables.

Added “From Address” for easymail emails.

v4.02

Bug fixes for the underlying dScript

v4.03

Editor update, added support for multiple editor tabs.
Compiler update, added support for multiple files in project.

Compiler update, added support for #ifdef, #else, #endif

v4.04

TCP server socket now transmits keepalives when connections become dormant
for 10 seconds. 6 unacknowledged packets at 10 second intervals will result in

port closure.

V4.05

Added phone app support (IO Network 2 on the App stores). Fixed bug that caused
intermittent module not found error on firmware update.

V4.06

Added system reboot button to config status screen.

dScript updated to support dS2832. See dScript-v4.xx manual.

V4.07

Added new features:
Ping

Used to ping other machines to check if responding.

Sequencer

Added a 120 step, 12 output sequencer

v4.08

Added display of MAC address to network configuration page.
Bugfix – NTP (Real time clock) startup failed under some circumstances.

Renamed command “counters” to “setcounters”.

V4.09

Added 3 new commands to Binary and AES Binary command set, to
control all relays in one command. Set all, set selected and clear selected.

Note:

If you have a custom app based on app-dSxxxx-v4-07 or earlier, you will need to re-

name the “counters” command to “setcounters” for it to compile with this version.

Devantech Ltd.

www.robot-electronics.co.uk

Содержание dS2824





























































Результаты поиска

Содержание dS2824

Отзывы:

Похожие инструкции для dS2824

Бренды по названию

Популярные бренды

Devantech dS2824, Руководство пользователя

Результаты поиска

Содержание dS2824

Отзывы:

Похожие инструкции для dS2824

Бренды по названию

Популярные бренды